SL52/SL62/SL72/SL82/SL92/SL102/SL81 Square reinforcing mesh manufacturer from China Anping Heyou Wire Mesh Products Co.Ltd

SL52/SL62/SL72/SL82/SL92/SL102/SL81 Square reinforcing mesh

Payment Terms:	T/T,L/C
Place of Origin:	Hebei, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Production Capacity: 2000tons monthly

Delivery Date: 10days

Packing: bundle

SL52/SL62/SL72/SL82/SL92/SL102/SL81 Square reinforcing mesh

Galvanized Mesh

Reinforcing mesh was made by deformed bar after drawn, which is accorded to Australian/New Zealand Standard AS-NZS 4671-2001. The material is 250N, 300E, 500L, 500N and 500E, the mesh spaces is 200mm, there is two sides overhang which is 100mm.

the steel bar after drawing shape as below figure:

1. The angle of the rib or inclined indentation of the reinforcing mesh panels' bar isn't less than 45°. The angle scope is greater than 45° and is less than 70°, the rib height is from 0.025d to 0.10d.

2. The reinforcing mesh panel includes transverse and longitudinal bar, pitch and overhang. The Australian and new zealand's market, the normal panel size is 2.4m*6m.Because of containers size, we always advise our cutomer to make the panel size to be 2.2m*5.8m. It can be easy to be load and save more USD1000 per container for packing and loading cost.

3.Each sheet of reinforcing mesh panel shall include number of bars,pitch,length,width, and overhang dimensions. And the bar arrangement of reinforcing mesh panel has single bars, twin bars or combination of single bars and twin bars.

4.The technical data of Low Price Reinforcing Mesh Panel is contained composition and characteristic mechanical porperties of reinforcing steels.

4.1.1

Table1

Composition of reinforcing steels

Type of analysis	Chemical composition, % max
	All grades			Carbon equivalent value(Ceq)for standard grades
	C	P	S	250N	500L	500N	300E	500E
Cast analysis	0.22	0.050	0.050	0.43	0.39	0.44	0.43	0.49
Products analysis	0.24	0.055	0.055	0.45	0.41	0.46	0.45	0.51

4.1.2

Table 2

Characteristic mechanical properties of reinforcing steels

Property	250N(Note1)	500L(Note1)	500N	300E(Seismic)	500E(Seismic)	Type of specified value
Yield Stress(Mpa) RekL RekU	≥250---------	≥500≤750	≥500≤650	≥300≤380	≥500≤600	CvL: p=0.95CvU: p=0.05
Ratio Rm/Re	≥1.08---------	≥1.03-----------	≥1.08--------	≥1.15≤1.50	≥1.15≤1.40	CvL: p=0.90CvU: p=0.10
Unitform Elogation Agt(%)	≥5.0	≥1.5	≥5.0	≥15.0	≥10.0	CvL: p=0.90

Common size of Squre reinforcing mesh panel for Austialian Market

Mesh Type and reference number	Longitudinal bars		Cross-bars		Mass for 6 x2.4 m sheets		Cross-sectional area/m width
Mesh Type and reference number	No. x dia., mm	Pitch@mm	No. x dia., mm	Pitch@mm	Unit area kg/sqm	Sheet, kg	Long'l bars sqmm/m	Cross bars sqmm/m
Squre, with edge side-lapping bars
SL102	10 x 9.5 + 4 x 6.75	200100	30 x 9.5	200	5.6	80	354	354
SL92	10 X 8.6 + 4 X 6.0	200100	30 x 8.6	200	4.6	66	290	290
SL82	10 x 7.6 + 4 x 6.0	200100	30 x 7.6	200	3.6	52	227	227
SL72	10 x 6.75 + 4 x 5.0	200100	30 x 6.75	200	2.8	41	179	179
SL62	10 x 6.0 + 4 x 5.0	200100	30 x 6.0	200	2.2	33	141	141
Squre, without edge side - lapping bars
SL81	25 X 7.6	100	60 x 7.6	100	7.1	105	454	454

We are Square Reinforcing Mesh Exporter.

How can we conctrol our products quality for exporting Autralia?

Firstly, we purchase the material from Steel Factory and inspect chemical composition and mechnical property of reinforcing mesh panel in our in-house laboratary according to AS 1554.3.

Secondly, the panel size tolerances meassure way as:

Notes:

1. Grade 250N is supplied as plain round reinforcing steel complying with AS 3679. 1, exceptthe tolerance of the diameter and roundness dosen't apply it.

2. For 500L steel bars, only requriement for wire diameter is less than 5.0mm is RekL≥500

a. Panel Size dimensions≤6m in length, there is 40mm tolerances.

b. Panel size dimensions＞6m in length, the tolerance is ±0.7%

c. Wire diameter and mesh size measure and weld shear resistance test conformance to AS NZS 4761-2001 and as per contract.

d. Weigh the each bundle weight to calculate each panel weight.